2.5. Device Information Setup
In the Device Information Setup, the following information can be obtained about the Annexxus device: number of video
channels, number of sensor inputs, number of control outputs, number of internal storage devices, device current firmware
version, and device serial number.
The authorized users can also assign/change customer device name, change the overwrite mode (applicable models only),
upgrade the device's firmware version, and format internal storage device (applicable models only).
Device Name
In the Device Name, enter the custom name for the connected Annexxus device.
Overwrite Mode
Overwrite mode is only applicable to the Annexxus models that support the internal storage device (SD card/USB storage).
Currently, only Annexxus 301C and 301C2M support internal video recording.
Set the Overwrite Mode to
ON
to overwrite older video recording once the internal storage drive becomes full.
Set the Overwrite Mode to
OFF
to stop video recording to the internal storage drive once it fills up.
Note
All new internal storage devices (SD
cards/USB storage) must be formatted be-
fore being connected to the Annexxus
device.
Firmware Upgrade
This function is only available to authorized users. Read Upgrading Firmware section for instructions on how to upgrade
Annexxus device firmware.
Format Disk
This function is only available to authorized users.
30
Device Information Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at