background image

8

www.i3-technologies.com

1.1.4.25  It is important to give your eyes some rest(5 minutes every hour) when viewing the product screen for  
                long periods of time.
             » This will alleviate any eye strain.
1.1.4.26  Since the display panel is hot after using it for a long time, do not touch the product.
1.1.4.27  Keep the small accessories in a location out of the reach of children.
1.1.4.28  Take care when adjusting the angle of the product or the height of the stand.
             » If your hand or finger is caught, you may be injured.
             » If the product is tilted excessively, the product may fall and this may result in injury.
1.1.4.29  Avoid placing a heavy obhect over the product
             » Otherwise, it may result in a problem with the product or injury.
1.1.4.30  When using headphones or earphones, do not turn the volume too high.
             » Having the sound too loud may damage your hearing.
1.1.4.31  Be carefu that children do not place the batteries in their mouths when removed from the romote  
                control. Place the battery in a location that children or infants cannot reach.
             » If children have had the battery in their mouths, consult your doctor immediately.
1.1.4.32  When replacing the batteries, insert them with right po, -).
             » Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to   
             leakage of the internal liquid.
1.1.4.33  Use only specified standard batteries. Do not use new and used batteries together.
       » This may cause a battery to break or leak and may cause ifre, injury, or contamination(damage).
1.1.4.34  The batteries(and rechargeable batteries) are not ordinary refuse and must be retumed for recycling   
                purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
             » The customer can return used or rechargeable batteries to a nearby public recycling centre or to a   
             store selling the same type of the battery or rechargeable battery.

• Products at the same time holding the products when building or product, do not hold the back of the 
   handle. under the product makes. the handle is a secondary role..
• Table stand and put them on the table by using the installation gets the nose does not necessarily prevent a  
   fall on the floor using the screws fixed.

Attention: In order to reduce the risk of electric shock.
Do not open the cover or backcover. If you have a product or service, please request our customer  

support center. 

Summary of Contents for i3TOUCH V-Sense V7004 T10































Reviews: