ii
ACCESSORIES
Keys and buttons for the light pen
Touch control pen tip
Front
Rear
Power switch
How to use (your light pen)?
Press the touch control pen tip to the screen, signals transmitted
from the tip to validate locations with sensors in projector.The touch
control pen tip lights up when sending signals.
1) Place the pen tip anywhere on the screen.
2) Press the pen tip to the screen to activate.You may draw lines in
paint brush mode.
Note:
The sensor on the pen tip consumes power when the tip touches
anything. Please power off the pen when not in use. Touch the pen
tip and see if there is light emitting to make sure.
Before using the light pen
Make sure it is powered on.