Ax41C1M 1MP Network Camera
QUICK START GUIDE
i³ INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
Canada 780 Birchmount Road,
Unit 16, Scarborough,
ON, M1K 5H4
U.S.A. 440 Lawrence Bell Drive,
Suite 16, Williamsville
NY, 14221
This function is designed to update firmware. Stop all camera operations when you
update firmware. Do not turn off power or disconnect the internet connection during the
firmware update process. Click “Restart Camera” after you have updated firmware suc-
cessfully.
• Restart Camera – The camera is restarted without changing any settings. Typically used after
updating fir ware. After clicking, a pop up will appear asking you to confirm. Click Yes.
• Factory Default – Resets the camera to factory settings but keeps the Network settings. After
clicking, a pop up will appear asking you to confirm. Click Yes.
• Hard factory default – Resets the camera to factory settings and will cause all parameters
(including the IP address) to be reset. After clicking, a pop up will appear asking you to confirm.
Click Yes.
