2
CONNECT THE BUNDLE ...
Revisions
Revision
Release Date
Changes
1
February 17, 2017
initial release
1
Introduction
With the PLC Stamp 1200 micro evaluation kit you can kickstart the development of your own Homeplug AV2
Powerline enabled device.
The bundle consists of:
•
1x PLC Stamp 1200 micro
•
1x PLC Stamp 1200 micro EVB
•
1x PLC Stamp 1200 micro EVB Ethernet daughter board
•
1x IEC mains cable
•
2x Ethernet cable
•
1x Gigabit Powerline Adapter
You will also need:
•
2 Computers or Notebooks with an Gigabit Ethernet port
2
Connect the bundle ...
Configure the EVB for the Ethernet Daugther Board:
•
place jumper as shown in Figure 1
Connect the EVB as shown in Figure 2
•
plug in the IEC power connector to PLC Stamp 1200 micro EVB
•
plug the PLC Gigabit Adapter into wall socket
•
plug in the CAT5 (or higher) ethernet cable between PLC Stamp 1200 micro EVB and Computer #1
•
plug in the CAT5 (or higher) ethernet cable between PLC Gigabit Adapter and Computer #2
3/5
