22
Chapter 2. Camera Installation
2-1.
Ceiling Mount installation
Preparation – Remove the dome cover
1. Use the supplied security torx key to loosen (not remove) the
three cover screws.
2. Loosen the three screws (marked with the triangle icon) on
the dome base.
3. Remove the back case.
LAN Cable assembly
1)
Drill a hole on the rubber seal plug and insert an Ethernet cable through the opening.
2)
Strip part of the sheath from the Ethernet cable.
3)
You will need an RJ45 crimping tool to attach the Ethernet wires to a connector. When d
one,
connect the cable to the camera’s Ethernet RJ45socket.
Fix the camera on the Ceiling & Wall
1)
Paste the Mount hole sticker on the position that you want to install.
2)
According to your needs, create 6mm (0.2”) holes at the
T1/T2template positions. Then insert
