WT200B USER MANUAL
-----------------------------------------------------------------------------------------------------------------------------------------
Page 15 of 18
5.2. Set APN
Send the SMS to the tracker as following format
Command
Remark
Command format:
Format 1:
#802#APN###****##
Format 2:
#802#APN# APN user
name#APN password #0000##
**** is the default password. Default:0000
Use format 2 if your APN requires APN user name and
APN password.
For example:
#802#CMNET###0000##
#802#CMNET#abcdef#12345678#0000##
802 : Command code
0000: password, default 0000
CMNET: APN, is gateway to connect internet, Each
country is different, please contact your SIM card provider
for APN name.
5.3.Set IP and Port
Send the SMS to the tracker as following format:
Command
Remark
Command format:
#803#IP#port#****##
**** is the default password. Default:0000
For example:
#803#58.64.205.22#8010#0000##
803 : Command code
0000: password, default 0000
58.64.205.22
900D Platform server IP
8010
900D Platform server software Port
5.4.
Upload data in preset time
Send the SMS to the tracker as following format:
Command
Remark
Command format:
#730#T#N#****##
**** is the default password. Default:0000
(1) T=
Record location by interval, from 10 to 65535 in
the unit of second.
(2)N= Upload Record Location Quantity Per Time, from
1-50.
(3)Upload location data interval=T*N
N=0, close upload data by preset interval, the gps tracker
will reply ”GPRS Timer Stop”
For example:
#730#60#1#0000##
730 : Command code
0000: password, default 0000
In this example: WT200B will send location every 60
seconds (1 minute), 1 location reports per time.
5.5. Please go to
http://www1.igpstracking.net/
Enter the user name and password we provided.
After log in, please go to “Vehicle Manager-Vehicle List”