VT1000 USER MANUAL
5
SMS “Supplyoil123456” to the tracker. "Supplyoil" as instruction, "123456" as the password.
7. Control Circuit
Send SMS
“
spassword”
to control circuit. For example send SMS:
“
stopelec123456”.
"stopoil" as instructions, "123456" as the password.
To supply the circuit again, send SMS
“suppassword”
to the unit. For example, send
SMS “Supplyelec123456” to the tracker. "supplyelec" as instruction, "123456" as password.
8. Switch between “tracker” and “monitor”
Send SMS “
password
” to the unit, it will reply “tracker ok!”. For example send SMS “tracker123456”.
In this mode, you can get position SMS by call tracker. D
efault :tracker
Send SMS “
password
” to the unit, and it will reply “monitor ok!” and switch to “monitor” mode. For
example send SMS: “monitor123456”. In this mode, you can monitor tracker by call tracker card number.
9. “Monitor”
There are three modes for monitor.
1) All Monitor Mode: Send SMS
“
allmonitor
”
to the unit, the unit will return to this mode. In this mode, any
number can monitor this unit.
2) Restrict Monitor Mode: Send SMS
“
restrictmonitor
”
to the unit, the unit will return to this mode. In this
mode, authorized number can monitor this unit.
3) Close Monitor Mode: Send SMS
“
closemonitor
”
to the unit, the unit will return to this mode. In this mode, all
numbers can not monitor this unit.
10
. Movement alert
Set up: The user can send SMS
“move+password”
to the unit, then the unit will reply
“
move ok!” .In case of
such a movement, it will send SMS “move+Geo-info” to the number.
For example, send SMS “move123456” to the unit. "move" as instructions, “123456”as password.
Cancel: Send SMS “
password
” to deactivate the movement alert.
Default radius is 200 meters, if GPS tracker moves out this radius, then it will send SMS alert.
11. Overspeed alert
Set up: Send SMS
“speed+pspace+080”
to the unit (support the speed is 80km/h).
Example, send SMS “speed123456 080”. "speed" as instruction, "080" as limit speed, “123456”as password.
Cancel: Send SMS “
password
” to deactivate the overspeed alert.
12. Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the
authorized numbers when it breaches the district.
Set up: The user can Send SMS “
spspace+MinLatitude,MinLongitude;MaxLatitude,
MaxLongitude
” to unit to set the restricted district. In case of breach, it will send SMS
“
stockade! + geo-info” to
the authorized numbers.
For example send SMS “stockade123456 22.548123,114.081234;22.549123,114.082234” to the unit.
Remark: The first latitude & longitude is coordinate of min of the Geo-fence, while the second latitude &
longitude is the coordinate of the max. It will alarm one time in each setting.
Cancel: Send SMS “
nospassword
” to deactivate this function.
