i
6
OIM BL-886 V1.2 Page 6 of 6
Default
Description
Display
Parameter
E-mail : [email protected]
Website : www.itherm.co.in
338, New Sonal Link Service Industrial Premises Co-op Society Ltd,
Tel: 022-66939916/17/18;
Building No.2, Link Road, Malad (W), Mumbai - 400064.
Mfgd by: Innovative Instruments & Controls LLP
i
Reso-
lution
0.
1000
Scale
Factor
0.00001
to
999999
1000.
Set DP
Point
This option doesn't appear if the dot position for scale is at 6th position(LSB
position). User can set screen resolution for RUN Mode. & for Set Count.
000000
to
0.00000
User can set desired Scale Factor value. 'SCAL' will be displayed on lower
display & last stored/default value of Scale will be displayed on upper
display. User can change this value by using Up/Down/Shift key. Press 'set'
key to store the desired value & move to next parameter.
000000
to
0.00000
User can set position of decimal point for scale factor. The last set value of
scale will appear on the upper display & the lower display will toggle b/w
“SELt” & “DP”. Position of decimal point can be shifted from LSB to MSB by
using the shift key.
Leading
Zero
Disable
User
Lock
15
Enable:-
If selected Leading Zeros will display in Run mode.
Lead-0:-
This parameter allows the user to Enable or Disable Leading Zeros in Run
mode.
Disable:-
If selected Leading Zeros will not comes in Run mode.
Default User Lock Code is “15" to access Control & Configuration List.
User has a choice to set its own User Lock Code between 1 to 9999, this is to prevent
unauthorized access of Configuration List.
