1. Get the Mechanical Drawing :
You can get the mechanical drawing of your product model from our web site : www.itechlcd.com . If you can’t find the
correct mechanical drawing, contact your local dealer.
2. Make the cut out :
There is the cut out dimension in the Mechanical Drawing. Make sure your cut out meet the cut out dimension requirement.
If the cut out is too small, there will be some interference. If the cut out is too big, you can’t have the panel
mounting securely. Please note that there is thickness limitation of the mounting wall for panel mount installation.
3. Prepare the accessory :
For panel mounting kit installation, you will receive mounting kits and screws together with your unit and you have to
prepare the screw driver by yourself. There are at least 2 mounting kits for each side of the panel. The mounting kit and the
screw is paired.
4. Installation :
4-1. Put the monitor in the cut out from the front side of the mounting wall. The best way to mount the panel is to align the
bottom of the panel housing with the bottom edge of the cut out. This way can help hold the panel steadily.
4-2. At the back side of the mounting wall, insert the mounting kits into the slide hole at the side bracket on the panel.
4-3. Put the screw on the mounting kits and screw it tightly.
4-4. Finish all the mounting kits one by one then you can have a secure installation for your Panel Mount product.
i-Tech Company LLC
TOLL FREE: (888) 483-2418 • EMAIL:
• WEB:
www.iTechLCD.com
