IACER SRL Pagina 9 di 16 MNPG61-02 del 11/04/11
i)
Wear the armband and connect the tubes to the armband plugs, paying attention
to connect the longer tube to the higher position connector on armband;
ii)
After connecting the tubes to the armband connect the tubes to the air discharge
output.
3)
Pressure regulator (selector on machine body)
a)
Air pressure in compression chambers can be adjusted from 0 to maximum pressure
(around 217 mmHg ± 20%) by rotating the knob in clockwise;
b)
Start the treatment with a middle pressure and increase it progressively according to
your needs.
4)
Speed regulator (selector on machine body)
a)
The initial speed is set to 3 level when the device is turned on. Adjust the speed value
from 1 to 5 according to your needs.
5)
Therapy time (selector on machine body)
a)
With UP and DOWN buttons you can adjust (increase or decrease) the therapy
time;
b)
Air spends 2 minutes to go into in the applicator chambers.
