A
B
Figure 1.
■
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
Installation for standalone KVM
■
Install each bracket using screws
provided shown in
Figure 1.
M3.2 x 4.5 mm
M4 x 10 mm
■
Fix the KVM into the rack
Screw A: 2 pcs
Screw B: 8 pcs
