I-Tech ORTHOMAG, User Manual

Page: 14 / 28

I.A.C.E.R. Srl 14 MNPG207-02
Choose the program L (50 Hz) or H (75 Hz) by pressing the L
button or the H button, respectively.
When the program L starts, the OUTPUT LED flashes green.
When the program H starts, the OUTPUT LED flashes red.
POWER LED behaviour in battery mode
POWER LED green steadily lit: battery fully charged that allows you to
complete the treatment.
POWER LED flashing alternating green/red: battery half charged
(emission of magnetic field is guaranteed but not sufficient to start a
complete new cycle of therapy).
POWER LED red steadily lit: battery is low. The magnetic field is still
emitted until the device is switched off.
Therapeutic indications (average time of therapy 2/4 hours per
day)
To discontinue therapy and switch off the device, press and hold the
power button for 3 seconds.
CAUTION: if the applicator is not connected, the OUTPUT LED
flashes and the device beeps 3 times in a row. Check if the
applicator and the cable are intact and if the device is connected
correctly.
Program L (50 Hz) Program H (75 Hz)
Algodystrophy Scar adherence
Gonarthrosis Arthritis
Cartilage degeneration Arthrosis
Fractures Bursitis
Cartilage injuries Brachialgy
Osteoarthrosis Capsulitis
Osteonecrosis Cervical pain
Osteoporosis Whiplash
Delayed calcification Chondropathy
Pseudo-arthrosis Contusions
Coxarthrosis
Articular pain
Rheumatic disorders
Back pain