IACER Srl
11
MNPG71-06
•
the environmental electrical installation to which MIO-SONIC is
connected is compliant to the national laws;
•
the instructions for use contained in this manual are strictly
followed.
Should any foreign materials penetrate the device contact the retailer or
manufacturer immediately. If dropped down, check that the housing is not
cracked or damaged in any way; if so, contact the retailer or manufacturer.
Should you notice any changes in the device’s performance during tr
eatment,
interrupt the treatment immediately and consult the retailer or
manufacturer.
Consult a doctor before using MIO-SONIC with metallic
osteosynthesis devices.
IF YOU HAVE ANY DOUBTS REGARDING THE DEVICE USE CONSULT YOUR
DOCTOR.
Device use
Clean and disinfect the ultrasound head with a disinfectant solution before
and after the use.
To utilize MIO-SONIC:
1.
connect the power supply to the device.
2.
Move the switch to the
ON position
: the power
indicator (under the written POWER) will
illuminate, while the other six will begin to light
up alternatively and the head will start to
vibrate reporting that the device has
automatically preheating mode. When the
preset temperature is reached (after about 3
minutes) the six lights will flash 5 times, so the
