Page 6
Turning Your Headset On and Off
Turning On the Headset
Press and hold the
MFB
for 2 seconds until you hear a short beep. The
LED
will
flash blue.
IMPORTANT Press the MFB again each time you turn on the headset to
reactivate pairing so that the connection between the headset and the mobile
handset is resumed. For pairing, please refer to “Pairing Your Headset” on page
7-8.
Turning Off the Headset
Press and hold the
MFB
for 3 seconds until you hear a long beep. The
LED
flash
stops.
IMPORTANT
To disconnect the Bluetooth connection, please firstly turn of
your headset by pressing the MFB key.
Turning the Built-in Buzzer On and Off
Turning On the Built-in Buzzer
Press and hold the for 2 seconds until you hear a long beep. The LED
flashes blue.
NOTE The built-in buzzer is set to “ON” when shipped.
Turning off the Built-in Buzzer
Press and hold the Volume – for 2 seconds until you hear 2 short beeps. The LED
flashes red. Now, when there is an incoming call, the ringing tone can be heard
through the earphone only.
