I-Tech Bluetooth Virtual Keyboard User Manual Download

Page: 21 / 24

My keyboard is turned on
but no image appears.

Device is not charged

Charge device

Device is overheated

Move device to a cooler location and wait a few minutes

Device is not resting on a firm flat
surface

Reposition device to a firm surface and verify that the
micro-switch is fully depressed.

Micro-switch stuck

Clean micro-switch

After first connection
keyboard does not connect.
Blue LED flashes on and off
every 2-3 seconds.

Your Pocket PC device is not setup to
accept incoming connections.

Check your Pocket PC Bluetooth Settings; ensure that
Inbound and Outbound are checked.

“Bluetooth” does not
appear as option in
Connections list

Your Pocket PC device does not have
Bluetooth.

You have not activated Bluetooth on
your Pocket PC device.

Activate Bluetooth on your Pocket PC device.

The Bluetooth software on your Pocket
PC device is not compatible with the
keyboard.

Please contact your service center.

Summary of Contents for Bluetooth Virtual Keyboard

























Search results

Summary of Contents for Bluetooth Virtual Keyboard

Reviews:

Related manuals for Bluetooth Virtual Keyboard

Brands by name

Popular brands

I-Tech Bluetooth Virtual Keyboard, User Manual

Search results

Summary of Contents for Bluetooth Virtual Keyboard

Reviews:

Related manuals for Bluetooth Virtual Keyboard

Brands by name

Popular brands