www.tuv.com
Test Report No.: 14008928 001
Appendix 4
page 15 of 27
Page 5
Charging Your Earphone
Connect the charger to an AC wall outlet and the charger plug to the headset’s charging socket (fig.4). The
LED
will be red while charging.
IMPORTANT Charging indication will be delayed for a few seconds if the headset has not been used for
a long time or the battery is drained.
Nominal Charging Time
Charging the battery fully is normally within 3 hours. When the battery is fully charged, the
LED
will turn blue
and remains on for 30 minutes. Disconnect the charger from AC wall outlet and the headset. Press and hold the
MFB
(fig.1) for 2 seconds to turn the headset on, please refer to “Turning Your Earphone On and Off” on the
next page. For pairing, please refer to “Pairing your earphone”.
Talk & Standby Time
The fully charged battery offers up to 6 hours talk time and up to 150 hours standby time. When no calls are in
progress, the headset remains turned on in standby mode.
Low Battery
When the headset is on and the battery becomes low, the
LED
flashes red and the headset emits a beep every
1 minute. Please recharge the battery as described above.
