30
AO-IBR117
User’s Manual
4.5
Building RAMdisk Image (Optional)
1.
Enter
AO-IBR117
.
cd /home/
AO-IBR117
2.
Running the script below.
./build.sh
AO-IBR117
3.
See the image in the "release" directory.
ls release/
AO-IBR117
-20170519-030011/
rootfs.tar.bz2 u-boot-imx6dlsabresd.imx zImage zImage-imx6dl-sabresd.dtb
4.6
Install Linux to SD Card
1.
2.
Run the make card script below.
./make_sd.sh /dev/sdd 20150814-111827
3.
The appearance of the sentence "SD card for booting create done"
indicates the installation is successfully done.
4.
Pull out the SD card.
4.7
Booting with Your SD Card
Insert SD card to your board and insert special COM port dongle to boot from
SD. Connect a debug cable to debug port with serial port 115200/N/8/1
setting on your PC’s serial port program, such as hyperterminal/teraterm.
Connect LVDS 15
” display panel. Power on and you will see U-Boot prompt.
If you want to change to another monitor (or display panel) type, refer to the
section
3.2 Display Parameter Setting in Kernel
command.
Summary of Contents for AO-IBR117
Page 8: ...viii AO IBR117 User s Manual This page is intentionally left blank...
Page 15: ...General Information AO IBR117 User s Manual 7 1 1 7 Dimensions Unit mm...
Page 16: ...8 AO IBR117 User s Manual AO IBR117 Reference Heat Sink...
Page 39: ...31 Appendix This section provides the information of reference code...