7
Quick Start / USB 3.0 Metal Charging HUB 7 Port
EN
DESCRIPTION
1.
Input for connecting the power adaptor
2.
1x input USB 3.0 port type A for connecting to a notebook / PC
3.
7x output USB 3.0 ports for connecting USB equipment
4.
LED diode – the diode is ON when the HUB is connected to the power
adaptor or to a USB port of a notebook / PC
CHARGING
You can use external power adapter, if you connect printer, scanner or other
high power consumption devices to USB ports in HUB (power adapter is
included). Respect the basic rules while using this power adapter (for ex.
do not let in reach of children, if the adapter is in 230 V circuit, do not put it
into the water and so on).
CHARGING
The HUB supports charging of the connected USB mobile equipment such
as smartphones (including iPhone and Samsung phones), e-book readers,
multi-media players, GPS navigators, and tablets (e.g., Asus, Toshiba,
GoClever, Prestigio, Emgeton, Sencor).
The HUB does not support charging
of iPad and Samsung tablets which require special identification circuits.
Using the original cable connect the equipment to be charged to the USB
port of the HUB. At the same time the power adaptor needs to be connected
to the HUB as well.
Attention:
All USB 3.0 ports support quick charging (BC 1.2) but only allow a
maximum of 2 mobile phones charged at the same time depending on other
connected devices. If other connected devices require a larger amount of
energy (e.g. external drives), it is possible that only a single mobile phone
can be quick charged.
SYSTEM REQUIREMENTS
Hardware requirements
Notebook / PC with one available USB port
Operating system
Windows 7 / 8 / 8.1 / 10 32/64bit, macOS X 10.x or higher
SPECIFICATION
•
1x USB 3.0 port for connecting to a device
•
7x USB 3.0 port with quick charging support (BC 1.2)
•
1x input for power supply (DC 12 V/2.5 A)
•
LED indication (blue LED)
•
USB 3.0 cable (90 cm)
Summary of Contents for U3HUBMETAL7
Page 4: ......
