5
Quick Start / USB 3.0 Metal Charging HUB 10 Port
EN
INTRODUCTION
itec USB 3.0 Metal Charging HUB will immediately catch your attention thanks
to its
elegant metallic design
. It is an ideal companion for everybody who does
not have enough USB ports in his/her notebook, ultrabook or PC and who has
to constantly connect and disconnect his/her favorite USB equipment such as
flash disks, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
This HUB offers
10 USB 3.0 ports
with the
Plug & Play
function and
standard
USB charging
– the HUB will automatically detect connected equipment for
USB charging. One of the advantages is that thanks to their placement you have
enough space even for connection of large pieces of equipment. The
USB 3.0
interface
is important mainly for data transfers from USB 3.0 memory cards and
flash disks which will use its high transfer speed most.
The advantage is
included external power adapter
which you can use for backing
up data on external hard drives or for connecting high power consumption devic-
es which are powered directly from the USB port.
This
HUB does not require installation of drivers
. You will just connect it by the
USB cable to your computer and immediately you can start using it. This HUB has
a built in
overcurrent protection
of your computer in case of short connection on
the peripheries. The interface is compatible with USB 2.0 / 1.1.
Thanks to its
compact dimensions and low weight
it is an ideal companion
to your notebook when traveling.
INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10, MACOS X AND HIGHER
The HUB is installed automatically, no need install drivers. Connect the connector
of the power adaptor to the HUB and connect the power adaptor to a socket outlet
with 230V. Then plug the HUB via USB cable into available USB port (USB 3.0, 2.0
or 1.1 standard) of your notebook / PC and follow the on-screen instructions. The
HUB will be installed and displayed in Device