INTRODUCTION
Combination of passive HUB 3 port with card reader. An ideal companion for everybody who does not
have enough USB ports in his/her notebook, tablet or PC and who has to constantly connect and
disconnect his/her favorite USB equipment. The memory card reader will be appreciated especially
by users of digital cameras and HD video cameras using memory cards as a medium for a frequent
transmission of data.
This HUB offers
three USB 3.0 ports
for connecting the USB equipment and high speed data
transfer (5 Gbps). Supports Plug & Play function and standard USB charging – automatical detection
of connected mobile devices.
Two slots for memory cards
supports formats SD, SDHC, SDXC,
micro SD, micro SDHC and micro SDXC.
The
USB 3.0 interface
is important mainly for data transfers from USB 3.0 memory cards and flash
drives which will use its high transfer speed most. This HUB
does not require installation of
drivers
. You will just connect it by the USB cable to your computer and immediately you can start
using it. This HUB has a built in
overcurrent protection
of your computer in case of short connection
on the peripheries. The interface is compatible with USB 2.0. Thanks to its
compact dimensions
and low weight
it is an ideal also for using when traveling.
INSTALLATION IN WINDOWS XP / VISTA / 7 / 8 / 8.1 / 10 AND HIGHER, MAC OS X AND HIGHER
The HUB is installed automatically, no need install drivers. Connect the HUB via USB cable into
available USB port (USB 3.0 / 2.0 standard) of your notebook, tablet or PC and follow the on-screen
instructions. The HUB will be installed and displayed in Device manager as “Generic USB Hub” and
“Generic USB SuperSpeed Hub”.
USE WITH ANDROID DEVICE WITH SUPPORT FOR OTG
Card reader: a mass storage medium will be displayed after inserting the memory card. HUB: it allows
you to use a keyboard and mouse or connection of flash drive. Notice: charging of smartphones and
tablets is not possible, this possibility is available only for connecting to a notebook or PC.
CHARGING
The HUB supports charging of the connected USB mobile equipment such as smartphones
(including iPhone and Samsung phones), e-book readers, multi-media players, GPS navigators, and
tablets (e.g., Asus, Toshiba, GoClever, Prestigio, Emgeton, Sencor). Using the original cable connect
the equipment to be charged to the USB port of the HUB.
SYSTEM REQUIREMENTS
Hardware requirements
Notebook, tablet or PC with one available USB port
Operating system
Windows XP, Windows Vista, Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit,
Windows 10 32/64bit, Mac OS X 10.x or higher, Android devices with support for OTG
i-tec USB 3.0 Slim HUB 3 Port + Card Reader
E
N
G
L
IS
H
EN
05