i-tec U2BTD, User Manual

Page: 22 / 111

-
On the server in Folders in Bluetooth Places by right clicking on My Device choose
Properties
- In Bluetooth Configuration Panel select tab Serial Ports
- You can check (Properties), which port is being used for serial communication and
settings
Quitting the connection through Bluetooth serial port:
We recommend quitting from the client first:
-
On client’s PC in Folders in
Bluetooth Places choose the othe device that
communicate and use Blue Serial Port service
- In Bluetooth Places by right mouse clicking on Bluetooth Serial Port choose
Disconnect Bluetooth Serial Port
We do not recommend it on the server side:
- In Folders in Bluetooth Places choose My Device
-
In the right field of the window Bluetooth Places by right mouse clicking on
Bluetooth Serial Port choose Stop to terminate the service. You must start the
service here again for the next use of the service.
G. ActiveSync setup
ActiveSync through Bluetooth between PDA with remote PC with BT support (i-Tec
BT CF):
Note: Example of PDA setup with i-Tec BT CF
a) Basic presumption for using ActiveSync service:
PC:
-
There must be ActiveSync 3.6 or higher installed on the PC
-
There must be executed synchronization on selected items between PC-PDA
–
through physical cable (serial or USB) again
– see next figure