Environment
o
o
Operating values:
0 C - 40 C
Relative humidity:
20% - 80%
Physical
Dimensions of the adapter:
114x70x17mm
Weight:
164 g
USING THE POWER ADAPTER
Connecting the universal adapter to the device:
1. Connect the adapter to the 100/230V grid using the power supply cable.
2. Then connect one end of the USB-C cable to the USB-C port on the power
adapter.
3. Connect the second end of the USB-C cable to the charging USB-C port
on the device.
4. The LED indicator will go on and charging will start; charging may be
checked by a standard way on the charged device.
Note:
For charging of mobile phones and similar devices with USB chargers
you can use the USB-A port of the adapter.
Charging via the USB-A port
works if supported by the charged mobile phone (device).
Important safety measures:
ź
Do not pull the power supply cable from the socket outlet by pulling the
cable.
ź
Do not connect the power supply cable to the socket outlet if your hands
are wet and if you find out that the power supply cable is damaged (short-
circuited, burned PVC cover).
Also immediately disconnect from the grid
if you smell burning.
ź
Do not disassemble this device, do not make any modifications – risk of
fire, injury or damage to personal property. Entrust all repairs to the
manufacturer (ComDis s.r.o.).
ź
Do not expose to direct sunlight, do not place it on heating elements or
on any other source of heat. Do not cover it with paper or any other
material to allow circulation of air.
ź
Do not use in an environment with temperature below 0°C and higher
than 40°C.
Use in ventilated areas.
ź
Do not use the adapter with damaged supply cord, damaged output
cable or fuses.
ENGLISH
i-tec USB-C Smart Charger 60W
EN
07
