25
6.3
Operation with i-brush®
1.
Turn the hose of the standard equipment counterclockwise (Figure 20, pos 6).
2.
Remove the hose from the main body of the i-vac 5B®.
3.
Insert the hose of the i-brush (Figure 20, pos 4) into the hose connector (Figure 20, pos 2).
4.
Turn the hose clockwise to lock it into place.
5.
Push the plug from the i-brush (Figure 20, pos 5) onto the connector on the i-vac 5B (Figure
20, pos 1) and tighten the ring of the plug.
6.
Press the ON/OFF switch (Figure 20, pos 7) to turn on the i-vac 5B.
7.
Press the ON/OFF switch (Figure 20, pos 3) to turn on the i-brush.
8.
Start vacuuming. The i-brush works best if
no pressure
is applied to the brush.
Figure 20
6.3.1
After operation with i-brush
1.
Press the ON/OFF switch (Figure 20, pos 3) to turn off the i-brush.
2.
Press the ON/OFF switch (Figure 20, pos 7) to turn off i-vac 5B.
