29
5.
Pull out the rotating brush at the grip
(Figure 26, pos 1) and slide it out as
indicated at Figure 26, pos 2.
Figure 26
6.
Place the new rotating brush, first at the
side of the drive belt (
Figure 27, pos 1).
Make sure that the grooves in the brush are
aligned with the cams of the drive wheel.
7.
Slide in the other side (
Figure 27, pos 2).
When it clicks it is locked.
8.
Place the cover plate (Figure 25, pos 1)
back, place the bottom three nocks first in
position.
9.
Close the cover plate. When the three clips
(Figure 25, pos 2) click into place, it is
locked.
10.
Tighten the metal screws (Figure 24, pos 1).
Figure 27