36
7
Maintenance
CAUTION
Remove the battery before executing any cleaning or maintenance task.
CAUTION
Always keep the body of the i-mop
®
XL Pro in an upright position when replacing
the brushes or the squeegee.
7.1
Brush replacement
Figure 31
The brushes are attached to the scrub deck with a bayonet fitting.
1.
Put the i-mop XL Pro in store position, see section 4.2.
2.
Hold the scrub deck firmly with one hand.
3.
Using your other hand to turn the left brush (Figure 31, pos. 1) anticlockwise until you feel
resistance or see the motor disk turning as well.
4.
Pull the brush towards you, off the motor disk.
5.
Turn the right brush clockwise until you feel resistance or see the motor disk turning as
well.
6.
Pull the brush towards you, off the motor disk.
7.
Visually inspect the motor disks.
8.
Clean the i-mop XL Pro scrub deck with a clean, dry cloth before you install the brushes.
Summary of Contents for i-mop XL Pro
Page 8: ...8 10 2 Specifications 43 10 3 The i Story 44 ...
Page 42: ...42 10Attachments 10 1 CE Certificate ...
Page 45: ...45 ...