30
Figure 22
1.
Put the imop
®
Lite in store position, see section 4.2.
2.
Remove the recovery tank.
3.
Release the blue suction filter (Figure 22, pos 1) from beneath the rubber holder by tilting
it slightly and pulling it out.
4.
Clean the filter.
5.
Place the filter back in the rubber holder.
6.
Put the recovery tank back on the machine.
6.3.4
Removing the battery
Figure 23
1.
Put the imop Lite in store position, see section 4.2.
2.
Hold the imop Lite by the scrub deck to stabilize.
3.
While pressing the retaining clip inwards (Figure 23, pos 1), pull the battery away
(Figure 23,pos 2).
4.
When the imop Lite isn't used regularly, store the charged battery in a dry, clean place.
5.
Make sure the battery is charged monthly.
6.3.5
Checking the brushes and squeegee
1.
Check to see if both brushes are clean and intact, see section 7.1 for removal instructions.
•
Clean them under fresh water or replace them if necessary.
•
Replace brushes if the yellow wear indicator is the same height as other bristles.
2.
Check to see if the squeegee is clean and intact, see section 7.2 for removal instructions.
•
Clean it with fresh water and wipe it with a clean, damp cloth.
•
Replace the squeegee blades when necessary.
