28
6.2.3
ECO mode
The ECO mode will use 40% less cleaning
solution.
1.
Turn on the ECO mode by pushing the
ECO button (Figure 19, pos 1).
2.
Turn off ECO mode by pushing the ECO
mode again.
Figure 19
6.2.4
Turning off the imop
®
Lite
Releasing the trigger (Figure 20, pos 1) will
automatically stop the imop Lite.
Note that the vacuum motor will continue to
run for approximately 3 more seconds.
Figure 20
6.2.5
Emptying tanks
Dispose of water or cleaning solution from both tanks in an appropriate drain. Even though
the recovery tank is bigger, empty it each time the cleaning solution tank is filled.
WARNING
Please observe the local provisions regarding solution disposal related to
wastewater treatment.
