I:SY E5 ZR F, Translation Of The Original Operating Instructions

Page: 27 / 258

MY23I0a - 42_1.0_29.08.2023
27
Description
3.2 Nameplate
The nameplate is situated on the frame. The
precise position of the nameplate is shown in
Figure
3 .
The nameplate contains up to twelve pieces of
information.
Figure 2: Example of i:SY nameplate
A-01
0,25 kW / 25 km/h
zGG 140 kg
BJ 2023
EN 15194
nach
EPAC
i:SY GmbH Co. KG
Hauptstr. 34
32609 Hüllhorst, Germany
Typ:
3
1
2
4
5
6
7
8
9
10
11
EPAC 25 kg
No. Designation Description
More
information
1 CE marking
The manufacturer uses the CE marking to declare that the pedelec
complies with applicable requirements.
Section 13
2 Manufacturer You can contact the manufacturer at the address indicated. Section
1.1
3 Type number
All pedelec models have a three-digit type number, which is used to specify
the design model year, the type of pedelec and the version.
Section 1.6
4 Maximum continuous power rating
The maximum continuous power rating is the greatest possible power for
the electric motor output shaft over 30 minutes.
5
Maximum permitted total weight
(PTW)
The maximum permitted total weight is the weight of the fully assembled
pedelec with the body weight plus the baggage.
Section 3.1.3
6 Year of manufacture
The year of manufacture is the year in which the pedelec was
manufactured.
7 Pedelec type
Each pedelec is assigned a pedelec type, which determines its proper use,
function and area of use.
Section 3.1.1
8 Safety markings Safety markings warn of hazards. Section 2.7
9 Disposal instructions Follow the guidelines on waste disposal when disposing of the pedelec. Section 10.1
10
Area of use for city and trekking
bikes
Ride pedelec in permitted locations only. Section 3.1.5
11
Weight of the ready-to-ride pedelec
(optional; only for pedelecs 25 kg or
more)
The weight of the ready-to-ride pedelec is specified as a weight of 25 kg or
above and refers to its weight at the time of purchase. Any extra
accessories need to be added to the weight.
Section 4.1
12 Shut-off speed
The speed that the pedelec reaches at the moment when the current has
dropped to zero or to the no-load current value.
Table 10: Explanation of information on the nameplate