4
PROJECTION ALARM CLOCK RADIO - User Guide
www.philex.com
Box Contents
1x Projection alarm clock
1x 5VDC Power adaptor
1x User guide
Introduction
Your
IS-AC01 Projection Alarm Clock Radio projects the time in red
digits onto the ceiling allowing you to see the time at a glance.
Features & Benefits
· 1.2” LED display with dimmer
· 180° image rotation projection with focus adjustment
· FM radio with preset radio station
· Dual alarm wake up by radio/beep
· Snooze/sleep function
· USB charging port
Powering your alarm clock radio
Plug the power adaptor into a mains socket and connect the DC
jack plug to the DC power socket (20) on the back of the unit.
Switch the mains socket power on, the LED screen will light up and
the radio will enter standby mode
• The radio is also equipped with a backup system powered by a
3V lithium CR2032 coin cell (not supplied). If the power is
interupted, the radio automatically switches to the battery power
supply which powers the clock and ensures the timer settings are
not lost. The battery compartment (19) is located on the
underside of the
IS-AC01.
1.
Use a Phillips screwdriver to remove the screw holding the
compartment door closed and remove the door.
2. Insert the battery into the compartment making sure the positive
and negative (+ or -) sides of the battery are in contact with the
corresponding terminals in the battery compartment.
3. Refit the battery compartment door and replace the screw
Please Note: When replacing the battery, leave the power adaptor
connected. Otherwise, all clock and alarm settings will be lost
Setting the clock
1. In standby mode, press and hold the SET button (10) to enter
the clock setting mode.
2. Press the SET button (10) repeatedly to cycle through the
setting options:
Year
>
Month/Day
>
Time
3 Setting the year: Press the BACKWARD button
<
(11) or
FORWARD
>
(12) button to change the year.
