10
www.i-sens.com
www.i-sens.com
11
The KetoSens Meter uses two 3.0 V lithium batteries.
Before using the meter, check the battery compartment and
insert batteries if empty.
When the
symbol appears on the display while the meter is
in use, the batteries should be replaced as soon as possible. The
test results may not be saved if the batteries run out completely.
Inserting or Replacing the Batteries
Step 1
Make sure the meter is turned off. Push
the cover in the direction of the arrow to
open the battery compartment.
Step 2
Remove the old batteries one by one by
lifting with the index finger and pulling it
out with your thumb and index finger as
shown in the figure on the right. Insert
two new batteries with the + side facing
up and make sure the batteries are
inserted firmly.
Step 3
Place the cover on the battery
compartment. Push down until you hear
the tab click into place.
Note:
Removing the meter batteries will not affect your
stored results. However, you may need to reset your
meter settings. See page 15.
KetoSens Blood
β
-Ketone Test Strip
The KetoSens blood
β
-Ketone monitoring system measures
blood
β
-Ketone quickly and accurately. It automatically
absorbs the small blood sample applied to the narrow edge
of the strip.
Contact bars
Gently push the test strip, with its
contact bars facing up, into the test
strip port of meter
Confirmation window
Check here to see whether sufficient
blood sample has been applied
Edge to apply blood sample
Apply blood sample here for testing
Insert
Summary of Contents for KetoSens
Page 25: ...www i sens com 49 MEMO...
Page 26: ...50 www i sens com MEMO...
