EN
7
INSTALLATION
DANGER
Improper use can result in death or severe injuries! Only connect the device outside explosion
hazardous areas to the ISM interface of the
IS530.1
.
2
3
5
4
1
Unscrew the cover of the ISM interface (1) located on the
IS530.1
.
Push the
IS530.1
completely into the holder (2) of the device.
Attach the plug on top of the ISM interface (3).
Fix the plug by pressing the rounded end of the plug (4).
Tighten the screw (5).
Check whether the plug is correctly and firmly attached to the ISM interface.
The device can now be used together with the
IS530.1
in explosion hazardous areas.
CHARGING THE IS530.1
You can charge the
IS530.1
via the magnetic charger port on the
IS-TC1A.1
.
DANGER
An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries!
Only charge the
IS530.1
outside of explosion hazardous areas. Do not charge the
IS530.1
in
the vicinity of flammable substances.
NOTICE
Incorrect charging can cause damage to the device.
Follow the instructions in the „Charging“ section of the
IS530.1
operating manual.
Only charge the
IS530.1
using the
i.safe PROTECTOR 3.0
Magnetic Charger Cable (inclu-
ded in the
IS530.1
package).
Connect the
i.safe PROTECTOR 3.0
Magnetic Charger Cable to the magnetic charger port on
the
IS-TC1A.1
.
Summary of Contents for IS-TC1A.1
Page 1: ...IS TC1A 1 OPERATING MANUAL SAFETY INSTRUCTIONS MODEL MTC1A01 ...
Page 104: ......
Page 108: ...WWW ISAFE MOBILE COM ...
