i.safe MOBILE IS-MP.2, Quick Start Manual

Page: 7 / 28

EN 7
MAINTENANCE/REPAIR
Please note any legal requirements for periodic inspection.
The device itself has no user-serviceable parts. It is recommended to perform
inspections according to the safety regulations and advises.
If there is a problem with the device, please contact your vendor or consult the service
center. If your device is in need of repair, you can either contact the service center or
your vendor.
BATTERY
The battery in this device is not removable by the user. The battery is not fully charged
when the device is purchased, but it contains enough energy to power on the device.
To obtain best battery performance and battery life, let the battery discharge comple-
tely before charging it completely for the first three charging cycles.
CHARGING THE BATTERY
Connect the USB cable with the USB connector at the bottom of the device.
Connect the other side of the USB cable with the socket of the power supply.
After charging, remove the USB cable from the charger.
BATTERY USE
In actual use the run time of the device varies with the working environment and usage.
Please charge low battery; otherwise you may lose any files which are not saved.
WARNING
The device may only be charged at ambient temperatures in a range from 5 °C … 35 °C.
Please do not use charging equipment if the temperature exceeds this range.
KEYS AND SPECIAL FEATURES
(see illustration on page 2)
1
KEY 1: To read transponders.
2
KEY 2: For several Bluetooth function.
3
ON/OFF KEY:
Short press to power On/Off the device.
4
USB PORT: HID (Human Interface Device) and to charge the battery.
Do not open the USB port in hazardous areas!