4
To Record:
If you wish to Record this profile into your I-Roast before you start to
Roast, press the button. The display will show “REC”. To
choose which memory setting (1-10), push the and
buttons. Example: If you want to set your program at “7”, use the
and buttons until you see “7”. To approve your desired
number, push again. The display will show “END” for 3
seconds. This will end the proccess and reset the roaster to “0”.
To Start:
Push the “Roast/Temp” button:
NOTE: A strong commercial grade motor is used to ensure even
roasting and durability. Noise level may be higher than you may
be accustomed to.
For Memory:
To retrieve your programed setting, push button. The LCD will
show “REC”. Push or . The LCD shows 1-10 and stop at
your desired number. Push button to roast with the profile
you selected.
As you are entering in your memory settings, it is reccommended to
log your memory profiles seperately to avoid confusion later.
ADDITIONAL ROASTING FEATURES:
1.
Memory Function:
You have the option to Record up to 10 of
your favorite roasting curves. Please refer to “Memory” above for
complete instructions.
2.
Roasting Stage Display:
On the LCD display, there will be a
flashing dot above each Roman numeral. During the programming
process and the roasting process, the I-Roast has up to 5 roast-
ing stages. Stages 1-3: There will be a flashing dot located above
the corresponding Roman numeral. Stage 4: The dot will be
flashing above roman numerals I and II. Stage 5: The dot will be
flashing above romannumberals I and III.