7
We shall not be liable for content
compensation, losses of recorded or
edited content and any direct or indirect
consequent damages caused by failure to
record or edit due to faults with this unit or
the SD memory card. In addition, the same
provisions apply after unit is reparied.
About the CMOS image sensor
• When continuously shooting a bright
light source such as a spotlight, the color
filter of the CMOS image sensor may
become deteriorated and this may cause
discoloration. Even when changing the
fixed shooting direction after continuously
shooting a spotlight for a certain period, the
discoloration may remain.
•
When shooting fast-moving subjects or
objects crossing the shooting area may look
to be bending askew.
Cleaning this product body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury.
Do not use benzine, thinner, alcohol, or any other
types of solvents or detergents. Otherwise, it may
cause discoloration. When using a chemical cloth
for cleaning, read the caution provided with the
chemical cloth product.
• Do not loozen or remove screws unless
instructed to do so in the product
documentation.
Cleaning the lens
Use a lens cleaning paper (used to clean camera
lenses or lenses of spectacles). When using
solvent, use an alcohols solvent and do not use a
glass cleaner or a thinner.
Cleaning of the dome cover
• When cleaning the front panel, hose or spray
fresh water that is not containing lubricant
agent or silicon substances and wash away
adherents such as grain of sand. If dirt is hard
to remove, use a sponge soaked into the
fresh water mentioned above and wipe off.
• Do not wipe the cover with a dry cloth. (Using
dry cloth may spread oil constituent adhered
to the surface, and it may result in damaging
the ClearSight coating.)
• If dirt cannot be wiped off with a damp cloth,
use a neutral detergent for kitchen utensils,
and sufficiently rinse off the detergent.
When using a detergent containing wax
components such as determent for washing
cars, a detergent with polishing material
such as a compound, etc., and a nonneutral
(weakly acidic or weakly alkaline) detergent,
it can decrease the hydrophilic property and
peel off the surface coating.
• Do not use organic solvent such as benzine
and thinner.
• Before using a spray, abandon a few sprays
to eliminate impurities.
• Improper cleaning of the front panel may
cause the ClearSight coating to become
less effective. In this case, in order to have
effective ClearSight coating, a new front panel
must be purchased to replace the existing
front panel. Consult with your dealer or
construction contractor.
About the ClearSight coating
Due to effectiveness of the ClearSight coating,
drops are likely to be accumulated right under the
camera and it may cause a partial distortion of the
video.
