10
■
When using the RJ45 Ethernet cable (WV-QCA500A)
■
How to assemble the waterproof RJ45 connector
■
When using an I/O Cable
Recommended tightening torque:
0.69 N·m {0.51 lbf·ft}
Waterproof RJ45 connector
used for the existing camera
③
①
④
②
Note:
• When the waterproof RJ45 connector used for
the existing camera is deteriorated, replace it
with the connector included in the package of
the WV-QCA500A.
Crimp the RJ45 plug
Align “
▶
” with “
◁
” and then rotate until
“
▶
” aligns with “
⇦
”.
Approx. 20 mm
{25/32 inches}
Waterproof tape
(accessory of WV-QCA501A)
Stretch the waterproof tape by
about twice the length to use.
Basic Information
“
■
Cables”
Operating Instructions
“Audio output terminal”
Audio in
(white)
Audio out
(black)
< 1 m {3.28 feet} (Mic)
< 10 m {32.8 feet} (Line)
< 10 m {32.8 feet}
ALARM IN2 (red)
GND (black)
EXT I/O
DC12 V
2P power cable
(accessory of WV-QCA501A)
4P alarm cable
(accessory of WV-QCA501A)
12 V DC (red)
GND (black)
ALARM IN3 (gray)
ALARM IN1 (green)
RJ45 Ethernet cable (PoE),
category 5e or better, straight,
4 pairs (8 pins)
<100 m {328 feet}
I/O Cable
connection terminal
RJ45 network terminal
Inside
Outside
Approx. 20 mm
{25/32 inches}
