[Alarm test]
Click the [Execute] button to execute the alarm test function.
Note
•
When the test alarm function is executed, the camera will detect a command alarm. This can be used
to check the SD recording or notification to external devices triggered by alarm detection. Check the
related settings using the system logs of this camera and the external device set as the notification
destination.
•
The test alarm function cannot be executed multiple times during the alarm deactivation time.
3.8.2 Configure the settings relating to the camera action on alarm
occurrence [Alarm]
Click the [Alarm] tab on the “Alarm” page. (
®
“3.2.1 How to display the setup menu”, “3.2.2 How to operate
the setup menu”)
The settings related to the camera action on alarm can be configured in this section.
[Alarm E-mail notification]
Click “E-mail server >>” to display the setup menu that can configure the settings relating to E-mail notification
when an alarm occurs. The setup menu will be displayed in a newly opened window. (
®
settings relating to alarm E-mail notifications”)
[Alarm image SFTP transmission]
Click “SFTP setup >>” to display the setup menu that can configure the settings relating to SFTP transmission
when an alarm occurs. The setup menu will be displayed in a newly opened window. (
®
settings relating to SFTP transmission when an alarm occurs”)
[Alarm image recording(SD memory card)]
Click “SD memory card setup >>” to display the setup menu that can configure the settings relating to recording
images on an SD memory card when an alarm occurs. The setup menu will be displayed in a newly opened
window. (
®
“3.8.2.3 Configure settings relating to recording to an SD memory card when an alarm occurs”)
[TCP alarm notification]
Click “TCP alarm notification >>” to display the setup menu that can configure the settings relating to
transmitting TCP alarm notifications when an alarm occurs. The setup menu will be displayed in a newly opened
window. (
®
“3.8.2.4 Configure settings relating to TCP alarm notification when an alarm occurs”)
[HTTP alarm notification]
Click “HTTP alarm notification setup >>” to display the setup menu that can configure the settings relating to
transmitting HTTP alarm notifications when an alarm occurs. The setup menu will be displayed in a newly
opened window. (
®
“3.8.2.5 Configure settings relating to HTTP alarm notification when an alarm occurs”)
[SNMP transmission upon alarm detection]
Click “To SNMP setting” to display the setup menu that can configure the settings relating to SNMP
transmission when an alarm occurs. The setup menu will be displayed in a newly opened window.
(
®
“3.8.2.6 Configure settings relating to SNMP transmissions of alarm images”)
3.8.2.1 Configure settings relating to alarm E-mail notifications
Click “E-mail server >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (
®
the settings relating to the camera action on alarm occurrence [Alarm]”)
108
Operating Instructions
3 Detailed Settings
