12
⑴
When the SD ON/OFF button is pressed (less than 1 second), the SD indicator lights up in
green and data can be saved to the microSD memory card.
⑵
When the SD ON/OFF button is held down (about 2 seconds), the SD indicator lights off and
the microSD memory card can be removed.
⑥
SD ON/OFF button
Note:
• Lighting/blinking LED can be turned off with the software settings at any time. (The initial state
is lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation
conditions. (
☞
Operating instructions on our manual website)
④
SD indicator
• When a microSD memory card is inserted and could
Lights off
→
Blinks green
→
be recognized
Lights off
• When data can be saved after the microSD memory
Lights off
→
Lights green
card is inserted and the SD ON/OFF button is pressed
(less than 1 second)
• When data can be saved to the microSD memory card
Lights green
• When the microSD memory card is removed after holding
Lights green
→
Blinks green
→
down the SD ON/OFF button (about 2 seconds)
Lights off (recording)
Lights green
→
Lights off
(waiting for recording)
• When data cannot be saved to the microSD memory
Lights off
card because an abnormality was detected or the
microSD memory card is configured not to be used
⑤
SD memory card warning/error indicator
• When a warning status is detected
Lights red
*SD memory card warning detection conditions: After the total use time has exceeded 6 years
and the number of overwrite times has exceeded 2000.
• When an error status is detected
Blinks red
*SD memory card error detection conditions: Write error, read error, etc.
⑦
TELE + AF button
227V2L
226V2L
225V3L
Click the TELE+AF button to adjust the zoom ratio to the “Tele” side.
⑧
WIDE + AF button
227V2L
226V2L
225V3L
Click the WIDE+AF button to adjust the zoom ratio to the “Wide” side.
Note:
• The default is off. According to the installation environment, set up with software as required.
(
☞
Operating instructions on our manual website)
Note:
• After approx. 3 seconds from releasing the TELE+AF button or the WIDE+AF button, the auto
focus function will automatically be executed. Do not touch the camera during execution of
the auto focus function.