16
Change the registered information [Registered information]
Click the [Setup >] button for "Registered information" on the [Camera registration] tab to display the following
items.
After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab.
[Camera]
Up to the maximum number of registered cameras per
model can be connected.
[Model]
The model of a registered camera will be displayed.
(Blank: Camera is not registered)
Click the [
▼
] button to select the camera model from
Camera part number or the camera categories. Refer
to our technical information web site for camera
categories.
It is unnecessary to change it for normal use.
[Option]
Assign the operational mode of the camera having a
specific function due to the difference in function of
the camera.
Note:
• The method of installation will be set to the default
values of each mode if the options of the fisheye
camera are changed. Please refer to our technical
information web site for the default values of each
mode.
[Address]
An address already in use will be displayed. The
address can be changed using the on-screen
keyboard. Enter up to 255 alphanumeric characters
including hyphens (-) and periods (.).
Note:
• Entering "http://" is not necessary if the host name
is entered.
[Compression]
Select the image compression method.
H.265(1)/ H.265(3)/ H.265(4)/ H.264(1)/ H.264(3)/
H.264(4)/ MJPEG
Note:
• Assignment example by the application of camera
stream
①
Recording by compression of H.264, 1-screen
live display, browser display: H. 264(1)
②
Recording by compression of H.264, live multi-
screen display: H.264(2)
③
Recording by compression of H.264 or H.265,
1-screen live display, browser display:
H.264(1), H.264(3), H.264(4), H.265(1), H.265(3),
H.265(4)
④
Recording by compression of H.264 or H.265,
live multi-screen display: H.264(2), H.265(2)
• If "Do not use stream 2 of camera with each
function of this recorder" is switched to ON,
H.264(2) and H.265(2) are not used. (
☞
• When selecting "MJPEG" for "Compression", the
live image transmission rate and the frame rate
will be changed automatically to "5 ips".
(
☞
• When selecting "H.264(n)" or "H.265(n)" for
"Compression", it will become possible to select
"XF" in the image quality setting. (
☞
• Depending on the model of the camera, the
camera may reboot when the compression
method is changed. The reboot will be detected
as a communication error, but that is not a
malfunction.
[Authentication]
Set authentication used for the user authentication
when accessing the camera.
Digest: Uses digest authentication.
Digest or Basic: Uses either digest or basic
authentication.
Default:
Digest
[User name]
Enter the user name for accessing the cameras and
logging in using the on-screen keyboard. Register the
user name whose access level is "Administrator".
[Setup via recorder's main monitor]
