41
■
Recording setup (All cameras)
Set the recording frame rate and image quality. The
settings will be applied to all cameras.
[Frame rate]
Select the recording frame rate.
1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ips
Default:
10 ips
Important:
• For a camera whose compression method is [MJPEG],
"10 ips / 15 ips / 30 ips" cannot be selected.
• If a camera whose compression method is
[MJPEG] is included, [MJPEG] camera is set to
"5 ips" even if "10 ips / 15 ips / 30 ips" is set by
slider bar of frame rate setting. You can confirm
the current setting value with [Advanced setup >]
in Recording setup (All cameras).
[Image quality]
Select the recording image quality.
NQ (Normal): Standard quality
FQ (Fine): High quality
SF (Super Fine): Super fine quality
XF (Extra Fine): Extra fine quality
Default:
FQ
Important:
• For a camera whose compression method is
[MJPEG], "XF" cannot be set.
• If a camera whose compression method is [MJPEG]
is included, [MJPEG] camera is set to "SF" even if
"XF" is set by slider bar of image quality setting. You
can confirm the current setting value with [Advanced
setup >] in Recording setup (All cameras).
[Referenced recording days]
Calculates and displays the total number of days for
which recording on the hard disk drives is available.
Note:
• The referenced recording days will be displayed
correctly only when the settings have been saved
while the recorder has recognized the camera
correctly.
• The referenced recording days will be calculated
based on the assumption that recording is started
on Monday. The special day settings are not taken
into account.
• This value excludes the HDD consumption for the
event/emergency recording.
• If a camera manufactured by other than ours is
used, the value of "Referenced recording days"
will not be displayed.
• "*" preceding an item indicates that the item has
been changed on the "Advanced recording setup"
page.
• When configured to perform recording in high
resolution and high quality, recording may
sometimes not be performed at the specified rate.
When there may be possibility to fail recording at
the specified rate while using only our cameras,
the confirmation window will be displayed.
• When the "Auto data delete" (
☞
to other than "Off", the set number of days will be
recorded at the same time.
[Advanced >] button
The "Advanced recording setup" will be displayed.
Each camera can be set up separately for recording.
(
☞
[Setup via recorder's main monitor]
