13
Major operating controls and their functions
(continued)
Rear view
①
Security wire hole
Mount the lock device for the anti-theft security wire.
②
SIGNAL GND terminal [SIGNAL GND]
Connect this terminal with the SIGNAL GND terminals of
the devices in the system for signal ground. When
operating the recorder and the devices in the system
without signal ground, noise may be produced.
③
Main monitor output connector (HDMI)[A/V
MAIN
]
This connector is used to connect to an HDMI-ready
monitor (the main monitor). It displays live images,
recorded images, or the setup menu of the recorder.
④
Sub monitor output connector (HDMI)[VIDEO
SUB
]
This connector is used to connect to an HDMI-ready
monitor (the sub monitor). It only displays live images.
⑤
Alarm/Control terminal [ALARM/CONTROL]
It is used when connecting with an external device such
as a sensor or anti-theft door switch that output alarm
signals, or when connecting with an external alarm
equipment such as a buzzer or a lamp.
⑥
Mouse connection port (USB2.0) [ ]
The included mouse is connected to this port.
⑦
Network port (PC port) [PC]
Connect the recorder with a PC via a network
compatible with 10BASE-T, 100BASE-TX or
1000BASE-T. The right lamp (orange) only lights up at
1000M connection. The left lamp (green) only lights up at
100M connection. Both lamps light up at 10M
connection. The lamp blinks when sending or receiving
data.
⑧
Network port (Camera port) [CAMERA]
Connect the recorder with a PC and cameras via a
network compatible with 10BASE-T or 100BASE-TX.
When the port is being accessed, the access indicator
(green) blinks. When the port is supplying power, the
PoE indicator (orange) lights.
PoE indicator
Access indicator
Access indicator
PoE indicator
Note:
• The camera port comes with the PoE power supply
function that complies with IEEE802.3at.
• The camera number detected at Easy Start does not
match the camera port number (P1~P8 (P4: WJ-NU101))
on the rear panel of the recorder.
①
④
⑥
⑧
⑨ ⑩
②
③
⑤
⑦
WJ-NU101
