36
3. Details of the Settings screen – 3.3. SYSTEM SETTINGS
NETWORK
RENDERER
Set the operation mode during USB-DAC connection.
In OpenHome mode, even if you stop the controller app, it can be the play of the
playlist.
OpenHome mode is available in the corresponding controller app.
If you want to use the unsupported controller app to OpenHome, please set the
DMR.
Network Renderer Set it according to the controller app you use.
This unit is set to [OpenHome] at the time of purchase. Therefore, if you are unable
to operate this unit on your controller app, please try switching to [DMR].
DoP
When connecting to a USB-DAC that supports DoP (DSD Audio over PCM Frames),
you can set whether or not to play music with DoP.
When DoP is set to [On], you can use the DoP system to play back DSD content.
When using a USB-DAC that does not support DoP, this is set to [Off].
DoP
This is set to [On] at the time of purchase, and you can use the DoP system to play
back DSD content.
When connecting a USB-DAC that does not support DoP, this is set to [Off].
LAN SPEED
You can set the upper limit setting of the link speed in the LAN port (1=for Audio /
2=for Network) of this unit, and switch Off the ports.
You cannot set both LAN ports to [Off] at the same time.
* When a setting is changed, this unit will automatically reboot.
LAN port 1
Set the upper limit value of the link speed of each LAN port.
If you set it to [Off], the functions of that LAN port will be disabled.
* You cannot set both LAN ports to [Off] at the same time.
LAN port 2
