i-milk V1 Operating Manual July 2018
14
Cleaning The Mesh Filters
To Use Emergency Taps
Gently clean each mesh filter in warm soapy water and then
re-assemble in the order as shown in the picture, taking care
to insert the large o-ring as the final piece of the assembly.
Your i-milk has 2 manual
taps located in your Spare
Parts box. These taps allow
you to manually pour milk
from bladders in the event
that your i-milk cannot
dispense milk.
To use, load a bladder in
a drawer or tub as normal
but do not locate the
connector.
Insert the spigot of the
manual tap into the bladder
and secure the manual tap
into the key hole in the tub
or drawer. This secures the
tap and allows for it to be
operated with one hand.
Position the drawer or tub at
the edge of a bench to pour
directly into a jug.
After use ensure the manual
taps are thoroughly cleaned
and stored back in the spare
parts box for any future use.
Technical Adjustments
cont.
7
