I7S_I-KIDZ User Manual
2
1. Proper Use and Safety
To ensure proper use of the device and to prevent injury to the user or
damage to the device, please follow the guidelines below:
1.1 User Safety
●
Never touch the power adapter when hands are wet.
●
Device should only be plugged into properly grounded outlets.
●
Make sure the plug fits tightly into the outlet.
●
If t
he device or its accessories become damaged in any way, please do not
use.
●
If there is lightning, remove plug from the outlet immediately.
●
If device is fully charged, remove plug from the outlet.
1.2
Device Safety
●
Do not leave device in direct sunlight or in a car for prolonged periods.
●
Do not use the machine in dusty places.
●
Do not use the machine in wet places, such as the restroom.
●
Keep away from all magnets and magnetic devices, such as credit cards.
●
Never use any third-party accessories.
●
Never use any sharp objects to touch the LCD screen.
●
Press the LCD screen gently. Never hit the screen.
●
Keep the device away from water.
●
Be careful to never drop the device.
●
Do not attempt to repair, disassemble or in any way modify the device.
1.3 Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the device.
This device has been tested and found to comply with the standards for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These standards are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a different circuit than that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.