7
Key Description:
1. POWER: Press it to turn on/off the unit.
2. MUTE: Press once to turn the sound off and press it again to restore the sound.
3. TTX: Displays the teletext (if available).
4. SUBTITLE: Displays subtitle selection menu.
5. DISPLAY: Shows the information about the current channel.
In menu mode, press to display the help information about the keys.
6. FAV: Press to enter the favorite channels list.
7. EPG: Displays EGP menu (if available).
8. 0/10~9: Numeric buttons.
9. 10+: Digital selecting button, cooperatively used with numeric buttons.
10.
: Press to play/pause the current program.
11. ZOOM: Press to enter the screen zoom function.
12. LANGUAGE: Press to enter the audio language and L/R channel selection.
13. TV/VCR: To switch between TV/VCR.
14.
/
: In USB media play, press to select the previous file or the next file.
15.
/
: In screen zoom mode, press to switch among the different zoom scale.
In USB media play, press to start fast backwards or fast forwards function.
16. SETUP: Press to enter the Main Menu interface.
17. ENTER: Press to confirm the setting.
18.
(CH-) /
(CH+): Press to select the previous/next channel.
Moves the cursor up/down in the on-screen menu.
Also referred to as
Up/Down
keys throughout the manual.
19.
/
: Moves the cursor left/right in the on-screen menu.
Also referred to as
Left/Right
keys throughout the manual.
20. TV/RADIO: To switch between TV/radio channels.
21. VOL+/VOL-: press to increase/decrease the volume level.
22. RECORD: Press to start the record function.
23. PREVIEW: Press to browse the channel list.
24. EXIT: Press to exit from the current menu or sub-menu.
25. DEVICE LIST: Press to list the devices for recording.
26.
: C olor keys (respectively red, green, yellow and blue) used in a few
sub-menus.
* The layout of the remote controller is subject to change without notice.
6
Connections
(a) connecting to TV and VCR
1. Connect the signal from your terrestrial antenna to the
RF IN
connector on the back of
the DVB unit.
2. Connect the TV SCART connector on the back of the unit to the
SCART IN
connector
of the TV set.
3. Connect the VCR SCART connector on the back of the unit to the
EXT 1
connector of
the VCR set (if applicable).
4. Connect the
RF OUT
connector on the back of the unit to the
ANT.IN
connector on the
back of the VCR (if applicable).
ANT. IN
TV
ANT. IN
ANT. OUT
EXT 1
VCR
RF IN
VCR SCART
THE DVB UNIT
Terrestrial Signal
SCART IN
TV SCART
RF OUT
(b) connecting to TV only
ANT. IN
TV
RF IN
VCR SCART
THE DVB UNIT
Terrestrial Signal
SCART IN
TV SCART
RF OUT