i-joy lys19, User Manual

Page: 45 / 113

Set your LED TV
To put your LED TV in a firm place
which can bear the weight of the
LED TV.
To avoid danger, please don't expose
the LED TV near water or heating
place(such as light, candle, heating
machine), do not block the ventilation
at the back of LED TV.
Connect Antenna and power
1. Connect the antenna cable to the
antenna socket on the back of the
LED TV and the your antenna socket.
2. To plug the power cord of LED TV
(DC12V 2A)
3. Opened the bottom of the Power
below the TV set
Turn On LED TV
4. Press the power button of the Tv
the indication light will turn to green.
If the LED TV is in standby mode(the
light is red), press the power button
on the remote control or top of the TV.
(It's optional,particular place of the
power button)
Install and connect LED TV
NOTE :Picture for reference
purposes only.
10cm
10cm
10cm
TV ANT FM ANT
TV signal output
1
2
3
44