Please prepare a Phillips screw driver and 4 x AA batteries before installation. After
installation, calibrating the lock and debugging must be operated first.
In default setting, it can be unlocked with original password "1234567890 ",
There will be a low power alarm when voltage level is below 4.8V, it can only be unlocked
around 50 times, please replace with 4 new AA batteries in time. When the lock runs out of
battery power, it can be unlocked by connecting a power bank with a micro USB wire
though the emergency power port. (Please note the APP network function will not work in
this situation)
Please don't use any corrodent material to clean lock surface.
Please use mechanical key to unlock when the fingerprint, password and APP access
function is denying access. Make sure your keys are kept outdoor in a safe place.
Suitable door thickness: 35-55mm.
Working temperature : -25°C- 55°C.
any fingerprint or mechanical key.
The fingerprint capacity is 50, the password capacity is 50, the first two users are
administrators. Please input password as the first administrator.
Automatically lock and unlock feature.
Support volume adjustment(Mute /Low/High) and low power alarm.
Support 6-8 digit passwords and 16 virtual passwords.
Indicator Light: (White - Operate/Unlock successful) (Red - Operate/Unlock failure)
" "
Return or Quit. " " Confirm or Lock.
Name
Parameter
Fingerprint Sensor
Semiconductor
DPI
500
Identify Time
0.3S
Unlock Way
Fingerprint, Password, Key and APP
System Capacity
100
Supply Voltage
4.6V - 6.4V
Low Voltage Alarm
4.8V
Standby Current
<150uA
Information & Safety Warnings
Features
