I-GO Outlander WC01059, User Manual

Page: 6 / 16

PAGE 4
Getting In And Out Of The Wheelchair
Before you get into your wheelchair, you must make sure it’s on a flat surface with the
brakes applied and the leg rests flipped sideways. Make sure you are as close as
possible to the wheelchair and the castors are in the forward direction. Now you can,
leaning on the armrests, make the transfer to the wheelchair. To get out of the
wheelchair, follow the above instructions in reverse.
Bending Or Reaching
To reach an object whilst you are in your wheelchair, make sure you are as close as
possible to the object and that the front wheels are facing forwards and the brakes
applied to avoid falling out of the chair.
4. SAFETY WARNINGS
5. USER INSTRUCTIONS
»
Never connect anything to the wheels, this may cause damage to the chair and
also effect the balance of the chair and may injure the user;
»
Do not push the wheelchair with the brakes engaged. This may cause damage to
the wheelchair and a dangerous situation may occur;
»
The maximum user weight capacity has been indicated on your frame
label - do not exceed it;
»
The wheelchair is suitable for one person at a time - do not allow multiple
users at once.
Warning
The implementation of structural changes to the I-Go Outlander wheelchair
will invalidate the warranty.