I-GO Crest CSS, User Manual

Page: 6 / 32

PAGE 4
2. SAFETY NOTICE
Ramps, inclines and drops
»
Do not drive onto ramps that are steeper than the specified gradient.
Refer to the section entitled “CLIMBING ANGLE” in Specifications.
»
Always use a low speed setting when ascending or descending a gradient.
»
Do not drive on roads with large drops or potholes. Refer to the section entitled
“MAX. GROUND CLEARANCE” in Specifications.
»
Slow down when driving on roads with inclines.
»
Do not make sudden turns when driving on gravel roads or ramps.
»
Always lean forward when climbing a steep gradient.
Starting and Driving
1. Make sure the seat is installed properly.
2. Fold down the armrests to enable use.
3. Turn the power on.
4. Check battery indicator to see whether there is enough power for your journey.
If you have any doubt about the remaining power, recharge the batteries before
departure.
5. Set the speed dial to a position with which you feel safe and comfortable.
6. Check the joystick lever works correctly.
7. Make sure the electromagnetic brake works correctly.
8. Make sure it is safe around you before you drive onto the street.
Warning!
»
Do not set in freewheel mode when driving on a gradient.
»
Always re-engage the anti-freewheel device before use.
Fail to do so may result in injury
»
Always fasten the seat belt when operating the power chair.
»
To protect your safety, the power will automatically cut off and
electromagnetic brake system will activate while driving down a steep
gradient. This will limit the speed to a safe level. Turn the power on
again to re-start your power chair.
»
Maximum User Weight Limit Refer to section titled “MAX. LOAD WEIGHT“
in Specifications. Overloading past the weight limit may lead to damage of
your power chair or cause it to malfunction and will endanger your own
safety. The warranty does not cover this type of damage.