27 |
P a g e
Pulse P2DV Series User Manual
P2DV Maintenance Page
Server Maintenance
Restart – Click this button to restart the P2DV.
Restore – Click this button to perform a partial factory reset (The IP
address will not be cleared).
Restore the Device
Click “Restore” to reset the camera to default factory setting, except IP
Address.
Firmware Upgrade and Provisioning Items
Upgrade via
– This field lets you choose the firmware upgrade method. The P2DV supports
HTTP, HTTPS and TFTP.
Firmware Server Path
– The IP
address or domain name of the
firmware server (the location of the
firmware files) .
Automatic Upgrade Interval
– Enter
the frequency (in minutes) in which
the HTTP/HTTPS/TFTP server will be
checked for new firmware upgrades
or configuration changes.
Automatic Upgrade
– The default
setting is “No.” Choose “Yes” to
enable automatic. HTTP/HTTPS/TFTP
upgrade and provisioning. When set to “No”, the IP Camera will only perform a HTTP/HTTPS/TFTP
upgrade and perform a configuration check once during the boot process.
